Influence of synthesis factors on properties of geopolymers based on red mud and rice husk ash

Tran Ngoc Tuyen, Nguyen Duc Vu Quyen, Ho Van Minh Hai, Dang Xuan Tin, Tran Ngoc Quang
Author affiliations

Authors

  • Tran Ngoc Tuyen Department of Chemistry, College of Sciences, Hue University, 77 Nguyen Hue Str., Hue city, Viet Nam
  • Nguyen Duc Vu Quyen Department of Chemistry, College of Sciences, Hue University, 77 Nguyen Hue Str., Hue city, Viet Nam
  • Ho Van Minh Hai Department of Chemistry, College of Sciences, Hue University, 77 Nguyen Hue Str., Hue city, Viet Nam
  • Dang Xuan Tin Department of Chemistry, College of Sciences, Hue University, 77 Nguyen Hue Str., Hue city, Viet Nam
  • Tran Ngoc Quang Department of Environmental Science, College of Sciences, Hue University, 77 Nguyen Hue Str., Hue city, Viet Nam

DOI:

https://doi.org/10.15625/2525-2518/55/4/9262

Keywords:

red mud, rice husk ash, geopolymerization

Abstract

In this paper, the effect of mixing ratio of raw materials, curing temperature and time on geopolymerization between red mud and rice husk ash were investigated. The results showed that the optimum conditions were SiO2/Al2O3 ratio of 4 and Na2O/Al2O3 ratio of 2.0, curing temperature of 100oC and curing time of 24 hours. The compressive strength, bulk density, total shrinkage of the obtained product were 22.8 MPa, 2.39 g.cm-3, 15%, respectively that met requirement of unsintered bricks using for construction.

Downloads

Download data is not yet available.

Downloads

Published

11-08-2017

How to Cite

[1]
T. N. Tuyen, N. D. V. Quyen, H. V. M. Hai, D. X. Tin, and T. N. Quang, “Influence of synthesis factors on properties of geopolymers based on red mud and rice husk ash”, Vietnam J. Sci. Technol., vol. 55, no. 4, pp. 461–474, Aug. 2017.

Issue

Section

Materials

Most read articles by the same author(s)