Mechanical, thermal properties and morphology of composite coating based on acrylic emulsion polymer and graphene oxide

Dao Phi Hung; Vo An  Quan; Trinh Van Thanh; Nguyen Anh Hiep; Nguyen Thien Vuong; Mac Van Phuc

doi:10.15625/2525-2518/58/2/13932

Mechanical, thermal properties and morphology of composite coating based on acrylic emulsion polymer and graphene oxide

Dao Phi Hung, Vo An Quan, Trinh Van Thanh, Nguyen Anh Hiep, Nguyen Thien Vuong, Mac Van Phuc

Author affiliations

Authors

Dao Phi Hung Institute for Tropical Technology, VAST, 18 Hoang Quoc Viet, Cau Giay, Ha Noi, Viet Nam
Vo An Quan Institute for Tropical Technology, VAST, 18 Hoang Quoc Viet, Cau Giay, Ha Noi, Viet Nam
Trinh Van Thanh Institute for Tropical Technology, VAST, 18 Hoang Quoc Viet, Cau Giay, Ha Noi, Viet Nam
Nguyen Anh Hiep Institute for Tropical Technology, VAST, 18 Hoang Quoc Viet, Cau Giay, Ha Noi, Viet Nam
Nguyen Thien Vuong Institute for Tropical Technology, VAST, 18 Hoang Quoc Viet, Cau Giay, Ha Noi, Viet Nam
Mac Van Phuc Institute for Tropical Technology, VAST, 18 Hoang Quoc Viet, Cau Giay, Ha Noi, Viet Nam

DOI:

https://doi.org/10.15625/2525-2518/58/2/13932

Abstract

Studied results showed that graphene oxide (GO) had insignificant effect on adhesion of composite coating while graphene oxide improved abrasion resistance of composite coatings. The abrasion durability of studied coatings increased with GO ratio rising to 0.5% and then abrasion resistance of coatings decreased with GO ratio continuous growing up. SEM images witnessed that GO dispersed well into polymer matrix if GO weight ratio was 0.5%. TGA results also illustrated that thermal property of GO composite was better than that of neat coating.

Downloads

Download data is not yet available.

Downloads

Published

20-03-2020

How to Cite

[1]

D. P. Hung, V. A. . Quan, T. V. Thanh, N. A. Hiep, N. T. Vuong, and M. V. Phuc, “Mechanical, thermal properties and morphology of composite coating based on acrylic emulsion polymer and graphene oxide”, Vietnam J. Sci. Technol., vol. 58, no. 2, pp. 228–236, Mar. 2020.

IEEE

Download Citation

Issue

Vol. 58 No. 2 (2020)

Section

Materials

License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Vietnam Journal of Sciences and Technology (VJST) is an open access and peer-reviewed journal. All academic publications could be made free to read and downloaded for everyone. In addition, articles are published under term of the Creative Commons Attribution-ShareAlike 4.0 International (CC BY-SA) Licence which permits use, distribution and reproduction in any medium, provided the original work is properly cited & ShareAlike terms followed.

Copyright on any research article published in VJST is retained by the respective author(s), without restrictions. Authors grant VAST Journals System a license to publish the article and identify itself as the original publisher. Upon author(s) by giving permission to VJST either via VJST journal portal or other channel to publish their research work in VJST agrees to all the terms and conditions of https://creativecommons.org/licenses/by-sa/4.0/ License and terms & condition set by VJST.

Authors have the responsibility of to secure all necessary copyright permissions for the use of 3rd-party materials in their manuscript.