A novel design of the Roots blower
Author affiliations
DOI:
https://doi.org/10.15625/2525-2518/57/2/13094Keywords:
hydraulic machine, Roots blower, profile, flowAbstract
This paper reports a novel curve developed from non - circular gearing theory, which can be applied in rotor profile design of the two - lobe Roots blower. The formulas for calculating the volumetric efficiency and specific flow rate of the blower have also been established. To evaluate this type of the Roots blower, the volumetric efficiency and specific flow rate are being compared with those parameters of the two traditional designs and one recent variant.
Downloads
References
Y. B. Li, K. Jia, Q. W. Meng, H Shen, X. H. Sang - Flow simulation of the effects of pressure angle to lobe pump rotor meshing characteristics, Materials Science and Engineering 52, 2013, pp. 1-7.
Philander Higley Roots, Francis Marion Roots Patent - Rotary blower, US2369 Patent, 1860.
Wales L. Palmer, Israel W. Knox - Improvement in rotary pressure-blowers, US166295A Patent, 1875.
Litvin, F.L, Alfonso Fuentes - Gear geometry and applied theory, Cambridge, 2001.
Chiu Fan Hsieh, Yii Wen Hwang - Tooth profile of a Roots rotor with a variable trochoid ratio, Mathematical and Computer Modelling 48, 2008, pp. 19 – 33.
Chiu Fan Hsieh - A new curve for application to the rotor profile of rotary lobe pumps, Mechanism and Machine Theory 87, 2015, pp. 70 – 81.
Cai Ying jie, Yao LiGang, Du BeiJiang - Modelling and verification of a new Roots blower profile based on analysis of performance of different leaf contour, Journal of Chongqing University, 15 (3), 2016, pp. 95-102.
Pradip Balwat Shinde, Satischantra V Joshi, Swati P. Shinde - Effect of various rotor geometries on roots blower performance, International Journal of Advanced Technology in Engineering and Science, 4, 2016, pp. 31-37.
Libardo V. Vanegas Useche, Magd M. Abdel-Wahab, Graham A. Parker - A new noncircular gear pair to reduce shaft accelerations: A comparison with sinusoidal and elliptical gears, DYNA 83 (198), 2016, pp. 219-227.
Nguyen Hong Thai, Nguyen Thanh Trung - Establishing formulas for design of Roots pump geometrical parameters with given specific flow rate, Journal of Science and Technology, Vietnam Academy of Science and Technology, 53 (4), 2015, pp. 533-542.
Yaw Hong Kang, Ha Hai Vu - A newly developed rotor profile for lobe pumps: Generation and numerical performance assessment, Journal of Mechanical Science and Technology 28 (3), 2014, pp. 915- 926.
P.Y Wang, Z. H Fong, H. S Fang - Design constraints of five-arc Roots vacuum pumps, Proc. Instn. Mech. Engrs. Part C: J Mechanical Engineering Science, 216 (2), 2002, pp. 225-234.
Downloads
Published
How to Cite
Issue
Section
License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Vietnam Journal of Sciences and Technology (VJST) is an open access and peer-reviewed journal. All academic publications could be made free to read and downloaded for everyone. In addition, articles are published under term of the Creative Commons Attribution-ShareAlike 4.0 International (CC BY-SA) Licence which permits use, distribution and reproduction in any medium, provided the original work is properly cited & ShareAlike terms followed.
Copyright on any research article published in VJST is retained by the respective author(s), without restrictions. Authors grant VAST Journals System a license to publish the article and identify itself as the original publisher. Upon author(s) by giving permission to VJST either via VJST journal portal or other channel to publish their research work in VJST agrees to all the terms and conditions of https://creativecommons.org/licenses/by-sa/4.0/ License and terms & condition set by VJST.
Authors have the responsibility of to secure all necessary copyright permissions for the use of 3rd-party materials in their manuscript.
Vietnam Journal of Science and Technology (VJST) is pleased to notice: