Influence of polyethylene oxide content on some characteristics of PLA/CS films loading nifedipine

Nguyen Thuy Chinh, Trang Thi Thu Nguyen, Tran Thi Mai, Do Van Cong, Mai Duc Huynh, Tran Huu Trung, Vu Viet Thang, Thai Hoang, Nguyen Vu Giang
Author affiliations

Authors

  • Nguyen Thuy Chinh Institute for Tropical Technology, Vietnam Academy of Science and Technology, No 18, Hoang Quoc Viet, Cau Giay, Ha Noi, Viet Nam
  • Trang Thi Thu Nguyen Institute for Tropical Technology, Vietnam Academy of Science and Technology, No 18, Hoang Quoc Viet, Cau Giay, Ha Noi, Viet Nam
  • Tran Thi Mai Institute for Tropical Technology, Vietnam Academy of Science and Technology, No 18, Hoang Quoc Viet, Cau Giay, Ha Noi, Viet Nam
  • Do Van Cong Institute for Tropical Technology, Vietnam Academy of Science and Technology, No 18, Hoang Quoc Viet, Cau Giay, Ha Noi, Viet Nam
  • Mai Duc Huynh Institute for Tropical Technology, Vietnam Academy of Science and Technology, No 18, Hoang Quoc Viet, Cau Giay, Ha Noi, Viet Nam
  • Tran Huu Trung Institute for Tropical Technology, Vietnam Academy of Science and Technology, No 18, Hoang Quoc Viet, Cau Giay, Ha Noi, Viet Nam
  • Vu Viet Thang Institute for Tropical Technology, Vietnam Academy of Science and Technology, No 18, Hoang Quoc Viet, Cau Giay, Ha Noi, Viet Nam
  • Thai Hoang Institute for Tropical Technology, Vietnam Academy of Science and Technology, No 18, Hoang Quoc Viet, Cau Giay, Ha Noi, Viet Nam
  • Nguyen Vu Giang Institute for Tropical Technology, Vietnam Academy of Science and Technology, No 18, Hoang Quoc Viet, Cau Giay, Ha Noi, Viet Nam

DOI:

https://doi.org/10.15625/2525-2518/55/6/9617

Keywords:

Polyethylene oxide, compatibility, nifedipine, PLA/CS, morphology, hydrolysis

Abstract

This work mentions the effect of polyethylene oxide (PEO) content on some characteristics and properties of polylactic acid (PLA)/chitosan (CS) films loading nifedipine (NIF). The water contact angle, droplet size values and Field Emission Scanning Electron Microscopy (FESEM) images  of the films are used to investigate their morphology and hydrophobicity. The obtained results show that the hydrophobic property of the PLA/CS/NIF films is improved by the presence of PEO. Besides, the PLA/CS/NIF films containing PEO have tighter structure and water absorbed ability less than those of the PLA/CS/NIF films

Downloads

Download data is not yet available.

Downloads

Published

11-12-2017

How to Cite

[1]
N. T. Chinh, “Influence of polyethylene oxide content on some characteristics of PLA/CS films loading nifedipine”, Vietnam J. Sci. Technol., vol. 55, no. 6, pp. 716–724, Dec. 2017.

Issue

Vol. 55 No. 6 (2017)

Section

Materials

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Vietnam Journal of Sciences and Technology (VJST) is an open access and peer-reviewed journal. All academic publications could be made free to read and downloaded for everyone. In addition, articles are published under term of the Creative Commons Attribution-ShareAlike 4.0 International (CC BY-SA) Licence which permits use, distribution and reproduction in any medium, provided the original work is properly cited & ShareAlike terms followed.

Copyright on any research article published in VJST is retained by the respective author(s), without restrictions. Authors grant VAST Journals System a license to publish the article and identify itself as the original publisher. Upon author(s) by giving permission to VJST either via VJST journal portal or other channel to publish their research work in VJST agrees to all the terms and conditions of https://creativecommons.org/licenses/by-sa/4.0/ License and terms & condition set by VJST.

Authors have the responsibility of to secure all necessary copyright permissions for the use of 3rd-party materials in their manuscript.

Crossref
Scopus
Google Scholar
Europe PMC

Most read articles by the same author(s)

<< < 1 2