A procedure for optimal design of a dynamic vibration absorber installed in the damped primary system based on taguchi’s method

Nguyen Van Khang, Vu Duc Phuc, Do The Duong, Nguyen Thi Van Huong
Author affiliations

Authors

  • Nguyen Van Khang Hanoi University of Science and Technology,1 Dai Co Viet, Ha Noi, Viet Nam
  • Vu Duc Phuc Hung Yen University of Technology and Education, Khoai Chau District, Hung Yen Province, Viet Nam
  • Do The Duong Hanoi University of Science and Technology,1 Dai Co Viet, Ha Noi, Viet Nam
  • Nguyen Thi Van Huong Hanoi University of Science and Technology,1 Dai Co Viet, Ha Noi, Viet Nam

DOI:

https://doi.org/10.15625/2525-2518/56/5/11175

Abstract

The dynamic vibration absorber (DVA) has been widely applied in various technical fields. This paper presents a  procedure for designing the optimal parameters of  a dynamic vibration absorber attached to a damped primary system. The values of the optimal parameters of the DVA obtained by the Taguchi’s method are compared by the results obtained by other methods. The comparison results show the advantages of the procedure presented in this study

Downloads

Download data is not yet available.

Downloads

Published

10-10-2018

How to Cite

[1]
N. V. Khang, Vu Duc Phuc, Do The Duong, and Nguyen Thi Van Huong, “A procedure for optimal design of a dynamic vibration absorber installed in the damped primary system based on taguchi’s method”, Vietnam J. Sci. Technol., vol. 56, no. 5, pp. 649–661, Oct. 2018.

Issue

Section

Mechanical Engineering - Mechatronics