Building One-dimensional P-wave velocity model for the northern part of North West Region of Vietnam

Lê Tử Sơn, Hà Thị Giang, Đinh Quốc Văn
Author affiliations

Authors

  • Lê Tử Sơn Viện Vật lý Địa cầu - Viện Khoa học và Công nghệ Việt Nam
  • Hà Thị Giang Viện Vật lý Địa cầu - Viện Khoa học và Công nghệ Việt Nam
  • Đinh Quốc Văn Viện Vật lý Địa cầu - Viện Khoa học và Công nghệ Việt Nam

DOI:

https://doi.org/10.15625/0866-7187/34/3/2540

Abstract

The 1D P-wave velocity model and station corrections  were computed by Simultaneous Inversion/Coupled Hypocenter-Velocity Model Algorithm (Kissling E. at all, 1994) and  the data set of 135 local earthquakes (located with a minimum of 5 observations and an azimuthal gap ≤ 180°) for the northern part of  North West Region of Vietnam. Based on available research, initial P- wave velocity model contained of 17 layers was built with P wave velocity by 5.0km/s for first layer and by 8.0km/s for Moho with 32km of depth. For shallow crustal levels, thickness of the first layers is taken from 1 to 2 km. The layer thickness is increased gradually with increasing depth to about 4 to 5km at Moho depth. The ratio Vp/Vs = 1.71 is determined by Wadati method using seismic data in the northern part of North West region of Vietnam. After many VELES runs, we get a simpler model that comprise of 8 layers by combining layers where velocities are very similar.

Using this velocity model and the program HYPOCENTER 3.2 (Lienert, 1994), we relocated a set of 135 local events. The comparison  between  previous  earthquake  locations  and  new  relocated  shows  a good improvement and the RMS of the location errors are reduced that indicates the stability of the new model.

Downloads

Download data is not yet available.

Downloads

Published

02-11-2012

How to Cite

Sơn, L. T., Giang, H. T., & Văn, Đinh Q. (2012). Building One-dimensional P-wave velocity model for the northern part of North West Region of Vietnam. Vietnam Journal of Earth Sciences, 34(3), 243–250. https://doi.org/10.15625/0866-7187/34/3/2540

Issue

Section

Articles