Organic - Inorganic Hybrid Luminescent Composite for Solid-state Lighting
Author affiliations
DOI:
https://doi.org/10.15625/0868-3166/23/1/2610Keywords:
Solid state lighting, organic and inorganic hybrid composite, white light-emitting diodes.Abstract
White light emitting diodes (WLEDs) made by coating organic and inorganic hybrid composites on blue LED chips. Y3Al5O12:Ce (YAG:Ce) nano inorganic powder prepared by low-temperature Sol-Gel method exhibited broad green emission with the peak at 521 nm. Poly[2-methoxy-5-(2'-ethyl-hexyloxy)-1,4-phenylene vinylene] (MEH-PPV) polymer has high luminescence efficiency and red emission peak at 590 nm. The white light was obtained by mixing blue light from emission of the blue LED chip - Indium Gallium Nitride (InGaN) and green-red light from the fluorescence of nano- YAG:Ce and MEH-PPV polymer hybrid composite. The hybrid nanocomposite-based WLEDs exhibited broad band emission spectra from blue light to red wavelengths and provided the white light with a CIE-1931 coordinate of x = 0.2986, y = 0.2620 and a colour rendering index Ra = 84.36. The results suggest a potential application of nanocomposite based WLEDs in efficient solid-state lighting.
Downloads
Metrics
References
J. Y. Tsao (Member, IEEE), M. E. Coltrin, M. H. Crawford (Member, IEEE), and J. A. Simmons, Solid-State Lighting: An Integrated Human Factors, Technology and Economic Perspective, Proceedings of the IEEE (2009). DOI: https://doi.org/10.1109/JPROC.2009.2031669
Y. T. Lin, T. W. Zeng, W. Z. Lai, C. W. Chen, Y. Y. Lin,Y. S. Chang, W. F. Su, Nanotechnology 17 (2006) 5781. DOI: https://doi.org/10.1088/0957-4484/17/23/012
N. C. Chen, C. M. Lin, Y. K. Yang, C. Shen, T. W. Wangi, M. C. Wu, Jpn. J. Appl. Phys. 47 (2008) 8779. DOI: https://doi.org/10.1143/JJAP.47.8779
Analysis of LED Technologies for Solid State Lighting Markets by Emmanuel Chao, A report submitted in partial satisfaction of the requirements for the degree of Master of Engineering in Engineering - Electrical Engineering and Computer Sciences in the Graduate Division of the University of California, Berkeley.
Multi-Year Program Plan FY’09-FY’15 Solid-State Lighting Research and Development. March 2009, U.S.Department of Energy.
S. A. Carter, J. C. Scott, J. Brock, J. Appl. Phys. 71(9) (1997) 1145. DOI: https://doi.org/10.1063/1.119848
M. Yamada, T. Mitani, Y. Narukawa, S. Shioji, I. Niki, S. Sonobe, K. Deguchi, M. Sano and T. Mukai, JPN. J. Appl. Phys. 41 (2002) L1431-L1433. DOI: https://doi.org/10.1143/JJAP.41.L1431
F. J. P. Schuurmans, M. D. Pashley, Light (IEEE J. on Selected topics in quantum electronics) 8, No. 2 (2002) 333. DOI: https://doi.org/10.1109/2944.999188
L. Chen, C. C. Lin, C. W. Yeh, R. S. Liu, Light Converting Inorganic Phosphors for White Light-Emitting Diodes, Materials 3 (2010) 2172-2195. DOI: https://doi.org/10.3390/ma3032172
Chung DN, Dinh NN, Duong PH, Tuan CA, White light emission from InGaN LED chip covered with MEH-PPV polymer film. Proc. 6th Vietnam National Conference on Solid state Physics and Materials Science (SPMS-2009), Da Nang, Vietnam, 8-10 November 2009: 332-335.
Dinh NN, Chung DN, Duong PH, Characterization of Hybrid Composites of Nano YAG:Ce-CdSe/ZnS Quantum Dots and Conjugate Polymer Used for Solid State Lighting, International Journal of Engineering and Technology (IJET) – Volume 2 No. 7 July (2012) 1111-1115.
Downloads
Published
How to Cite
Issue
Section
License
Authors who publish with CIP agree with the following terms:- The manuscript is not under consideration for publication elsewhere. When a manuscript is accepted for publication, the author agrees to automatic transfer of the copyright to the editorial office.
- The manuscript should not be published elsewhere in any language without the consent of the copyright holders. Authors have the right to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal’s published version of their work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are encouraged to post their work online (e.g., in institutional repositories or on their websites) prior to or during the submission process, as it can lead to productive exchanges or/and greater number of citation to the to-be-published work (See The Effect of Open Access).
Published 10-04-2013