Parameter optimization of tuned mass damper for three-degree-of-freedom vibration systems

Nguyen Van Khang, Trieu Quoc Loc, Nguyen Anh Tuan
Author affiliations

Authors

  • Nguyen Van Khang Hanoi University of Science and Technology, Vietnam
  • Trieu Quoc Loc National Institute of Labour Protection, Vietnam
  • Nguyen Anh Tuan National Institute of Labour Protection, Vietnam

DOI:

https://doi.org/10.15625/0866-7136/35/3/3315

Keywords:

Vibration, tuned mass damper, optimal design, nonlinear programming

Abstract

There are problems in mechanical, structural and aerospace engineering that can be formulated as Nonlinear Programming. In this paper, the problem of parameters optimization of tuned mass damper for three-degree-of-freedom vibration systems is investigated using sequential quadratic programming method. The objective is to minimize the extreme vibration amplitude of vibration models. It is shown that the constrained formulation, that includes lower and upper bounds on the updating parameters in the form of inequality constraints, is important for obtaining a correct updated model. 

Downloads

Download data is not yet available.

Metrics

Metrics Loading ...

Downloads

Published

20-09-2013

How to Cite

[1]
N. V. Khang, T. Q. Loc and N. A. Tuan, Parameter optimization of tuned mass damper for three-degree-of-freedom vibration systems, Vietnam J. Mech. 35 (2013) 215–224. DOI: https://doi.org/10.15625/0866-7136/35/3/3315.

Issue

Section

Research Article

Most read articles by the same author(s)

<< < 1 2 3 4 5 > >>