Về dao động của cơ cấu cam có cần đàn hồi

Nguyen Van Khang; Vu Van Khiem

doi:10.15625/0866-7136/10289

Về dao động của cơ cấu cam có cần đàn hồi

Nguyen Van Khang, Vu Van Khiem

Author affiliations

Authors

Nguyen Van Khang
Vu Van Khiem

DOI:

https://doi.org/10.15625/0866-7136/10289

Abstract

None

Downloads

Download data is not yet available.

Downloads

PDF

Published

30-12-1990

Issue

Vol. 12 No. 4 (1990)

Section

Research Article

License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Most read articles by the same author(s)

Nguyen Van Khang, Dinh Cong Dat, Nguyen Thai Minh Tuan, Taylor expansion for matrix functions of vector variable using the Kronecker product , Vietnam Journal of Mechanics: Vol. 41 No. 4 (2019)
Nguyen Van Khang, Vu Duc Phuc, Nguyen Thi Van Huong, Do The Duong, Optimal control of transverse vibration of Euler-Bernoulli beam with multiple dynamic vibration absorbers using Taguchi's method , Vietnam Journal of Mechanics: Vol. 40 No. 3 (2018)
Nguyen Van Khang, Trieu Quoc Loc, Nguyen Anh Tuan, Parameter optimization of tuned mass damper for three-degree-of-freedom vibration systems , Vietnam Journal of Mechanics: Vol. 35 No. 3 (2013)
Nguyen Van Khang, Hoang Manh Cuong, Nguyen Thai Minh Tuan, Calculation of nonlinear vibrations of piecewise-linear systems using the shooting method , Vietnam Journal of Mechanics: Vol. 34 No. 3 (2012)
Nguyen Van Khang, Partial derivative of matrix functions with respect to a vector variable , Vietnam Journal of Mechanics: Vol. 30 No. 4 (2008)
Nguyen Van Khang, Tran Dinh Son, Bui Thi Thuy, Numerical calculating linear vibrations of third order systems involving fractional operators , Vietnam Journal of Mechanics: Vol. 34 No. 2 (2012)
Nguyen Van Khang, Nguyen Phong Dien, Nguyen Sy Nam, An efficient numerical procedure for calculating periodic vibrations of elastic mechanisms , Vietnam Journal of Mechanics: Vol. 38 No. 1 (2016)
Nguyen Van Khang, Tran Ngoc An, Flutter instability analysis of bridge decks using the step-by-step method , Vietnam Journal of Mechanics: Vol. 36 No. 1 (2014)
Nguyen Van Khang, Nguyen Trong Hung, A new algorithm for kinematic program control of optical parts by grinding , Vietnam Journal of Mechanics: Vol. 32 No. 3 (2010)
Nguyen Van Khang, Do Thanh Tung, A contribution to the dynamic simulation of robot manipulator with the software RobotDyn , Vietnam Journal of Mechanics: Vol. 26 No. 4 (2004)

1 2 3 4 5 > >>

Về dao động của cơ cấu cam có cần đàn hồi

Authors

DOI:

Abstract

Downloads

Downloads

Published

Issue

Section

License

Most read articles by the same author(s)

Make a Submission

Cover

Announcements

THE ELEVENTH NATIONAL CONFERENCE ON MECHANICS AND THE NINTH NATIONAL CONGRESS OF THE VIETNAM ASSOCIATION OF MECHANICS

OBITUARY OF PROF. NGUYEN QUOC SON

Keywords

Về dao động của cơ cấu cam có cần đàn hồi

Authors

DOI:

Abstract

Downloads

Downloads

Published

Issue

Section

License

Most read articles by the same author(s)

Make a Submission

Cover

Announcements

THE ELEVENTH NATIONAL CONFERENCE ON MECHANICS AND THE NINTH NATIONAL CONGRESS OF THE VIETNAM ASSOCIATION OF MECHANICS

OBITUARY OF PROF. NGUYEN QUOC SON

Keywords

Published by