Calculation of fracture mechanic parameters via FEM for some cracked plates under different loads

Ngo Huong Nhu, Nguyen Truong Giang
Author affiliations

Authors

  • Ngo Huong Nhu Institute of Mechanics, VAST, 264 Doi Can, Hanoi, Vietnam
  • Nguyen Truong Giang Institute of Mechanics, VAST, 264 Doi Can, Hanoi, Vietnam

DOI:

https://doi.org/10.15625/0866-7136/28/2/5523

Abstract

This paper describes some results in analyzing cracked plates via FEM based on the procedures in CASTEM 2000 [1]. The basic methods for computing the crack parameters by the finite element analysis are presented. Some programs written by GIBIAN languages to solve problems for cracked plates are given. In possible cases, the numerical results are composed with analytical solution or testing result that gives a good agreement. The influence of plate configurations, the crack length, the external load type on the crack characteristic values are considered. The numerical analysis for inclined crack at angle and in arbitrary position of plate, the crack at hole in the plate, the crack of gravity dams are realized. The given results and programs can be applied to practical problems for controlling the brittle failure state of a structure.

Downloads

Download data is not yet available.

Metrics

Metrics Loading ...

Downloads

Published

01-06-2006

How to Cite

[1]
N. H. Nhu and N. T. Giang, Calculation of fracture mechanic parameters via FEM for some cracked plates under different loads, Vietnam J. Mech. 28 (2006) 83–93. DOI: https://doi.org/10.15625/0866-7136/28/2/5523.

Issue

Section

Research Article

Most read articles by the same author(s)

1 2 > >>