Finite element modelling and experimental study on static deflection and vibration of piezoelectric composite plates

Tran Ich Thinh, Le Kim Ngoc
Author affiliations

Authors

  • Tran Ich Thinh Hanoi University of Technology
  • Le Kim Ngoc Hanoi University of Technology

DOI:

https://doi.org/10.15625/0866-7136/32/2/311

Abstract

A finite-element model based on the First-Order Shear Deformation Theory is developed for the static flexural shape and vibration control of a glass fibre/polyester composite plate bonded piezoelectric actuator and sensor patches. The piezoelectric's mass and stiffness are taken into account in the present model. A simple negative velocity feedback control algorithm coupling direct and converse piezoelectric effects are used to actively control the dynamic response of an integrated structure through a closed control loop. The static analysis and active vibration suppression control of a cantilever composite plate are performed as a numerical example to validate the proposed model. The Newmark-\(\beta\) method is used in the numerical simulation to calculate the dynamic response of the piezolaminated composite plate. The numerical results are presented with discussion and in good agreement with carried out experiments.

Downloads

Download data is not yet available.

Metrics

Metrics Loading ...

Published

02-07-2010

How to Cite

[1]
T. I. Thinh and L. K. Ngoc, Finite element modelling and experimental study on static deflection and vibration of piezoelectric composite plates, Vietnam J. Mech. 32 (2010) 121–133. DOI: https://doi.org/10.15625/0866-7136/32/2/311.

Issue

Section

Research Article

Most read articles by the same author(s)

1 2 3 > >>