Numerical-experimental investigation on vibration and bending failure of stiffened composite plates

Tran Huu Quoc, Tran Ich Thinh
Author affiliations

Authors

  • Tran Huu Quoc Hanoi University of Technology
  • Tran Ich Thinh Hanoi University of Technology

DOI:

https://doi.org/10.15625/0866-7136/32/2/308

Abstract

In this paper, free vibration and bending of laminated stiffened glass fiber/polyester composite plates with laminated open section (rectangular or T shaped) and closed section (hat shaped) of stiffeners have been studied by finite element method and experiment. A nine-noded isoparametric element with nine degrees of freedom per node is developed for the plates. The stiffener element is a three-noded isoparametric beam element with five degrees of freedom per node and the stiffeners can be positioned anywhere within the plate element. The natural frequencies of the laminated stiffened plates are determined experimentally by Dewebook device and DasyLab 7.0 software. The results calculated by computational model for above plates under different boundary conditions are in good agreement with experiments. The failure problems of these stiffened glass fiber/polyester composite plates are also investigated.

Downloads

Download data is not yet available.

Published

03-06-2010

Issue

Section

Research Article

Most read articles by the same author(s)

1 2 3 > >>