Computational Mechanics

15 Items

All Items

  • Modal analysis of plates resting on elastic foundation based on the first-order shear deformation theory and finite element method
    Thanh Trung Nguyen, Hao Nhu Ha Le, Vay Siu Lo, Thien Tich Truong
    354-366

    DOI: https://doi.org/10.15625/0866-7136/21193

  • Analytical modeling and computational optimization for a 1-DOF compliant mechanism
    Hung Dinh Nguyen, Hung Van Le, Minh Phung Dang, Hieu Giang Le, Thanh-Phong Dao
    311-330

    DOI: https://doi.org/10.15625/0866-7136/21113

  • Dynamic response of the micro-perforated crab beam used in MEMS vibratory gyroscope device
    Vu Van The
    1-14

    DOI: https://doi.org/10.15625/0866-7136/19477
  • F6

    Proportional Topology Optimization algorithm with virtual elements for multi-material problems considering mass and cost constraints
    Minh Tuan Tran, Minh Ngoc Nguyen
    334-357

    DOI: https://doi.org/10.15625/0866-7136/19613

  • Adhesive contact between two-dimensional anisotropic elastic bodies
    Nguyen Dinh Duc, Nguyen Van Thuong
    318-333

    DOI: https://doi.org/10.15625/0866-7136/19700

  • Study on the velocity of droplet at steady state in contraction microchannels by numerical simulation
    Thanh Tung Nguyen, Van Thanh Hoang, Duc Binh Luu, Ngoc Hai Tran, Minh Sang Tran, Le Hung Toan Do
    287-295

    DOI: https://doi.org/10.15625/0866-7136/18918

  • A polygonal finite element method for shakedown analysis of structures
    Phuc L. H. Ho, Canh V. Le, Phuong H. Nguyen, Dung T. Tran
    259-272

    DOI: https://doi.org/10.15625/0866-7136/19027

  • Design, modeling, and experimental evaluation of a self-sealing component for rotary shafts in magneto-rheological fluid devices
    Vo Van Cuong, Quoc Hung Nguyen, Le Hai Zy Zy, Ngoc Diep Nguyen, Le Duy Tuan, Do Huu Minh Hieu, Do Quy Duyen
    247-258

    DOI: https://doi.org/10.15625/0866-7136/19024

  • Numerical simulation of springback and twisting of stamped thin U-shaped copper alloy sheets with a change of the blank alignment
    Giap Xuan Ha
    117-130

    DOI: https://doi.org/10.15625/0866-7136/17662

  • Proportional Topology Optimization algorithm for two-scale concurrent design of lattice structures
    Minh Ngoc Nguyen, Duy Vo, Tinh Quoc Bui
    164-182

    DOI: https://doi.org/10.15625/0866-7136/18368

  • Buckling analysis of laminated composite thin-walled I-beam under mechanical and thermal loads
    Xuan-Bach Bui, Anh-Cao Nguyen, Ngoc-Duong Nguyen, Tien-Tho Do, Trung-Kien Nguyen
    75-90

    DOI: https://doi.org/10.15625/0866-7136/17956

  • Static and vibration analysis of functionally graded microplate with porosities based on higher-order shear deformation and modified strain gradient theory
    Van-Thien Tran, Van-Hau Nguyen, Trung-Kien Nguyen, Thuc P. Vo
    36-59

    DOI: https://doi.org/10.15625/0866-7136/17552

  • Limit state analysis of asymmetrical microstructures based on yield design computational homogenization approach
    Phuc L. H. Ho, Canh V. Le, Phuong H. Nguyen, Chanh T. Ngo
    526-537

    DOI: https://doi.org/10.15625/0866-7136/17985

  • Machine learning for predicting mechanical behavior of concrete beams with 3D printed TPMS
    Kim Tran-Quoc, Lieu B. Nguyen, Van Hai Luong, H. Nguyen-Xuan
    538-584

    DOI: https://doi.org/10.15625/0866-7136/17999

  • FEM shakedown analysis of structures under random strength with chance constrained programming
    Ngoc Trinh Tran, Tu Luc Trinh , Tien Dao Ngoc, Tan Giap Van, Khuyen Truong Manh, Thuy Ha Dinh, Manfred Staat
    459-473

    DOI: https://doi.org/10.15625/0866-7136/17943