Comparison of velocity distribution in turbulent diffusion jet given by the integral model and code CFD FLUENT 6.0

Bui Van Ga, Pham Thi Kim Loan, Nhan Hong Quang
Author affiliations

Authors

  • Bui Van Ga Danang University
  • Pham Thi Kim Loan Danang University
  • Nhan Hong Quang National Institute of Labour Protection

DOI:

https://doi.org/10.15625/0866-7136/27/1/5714

Abstract

Integral model is simple in utilization, low in CPU time calculation, suitable for a lot of practical applications of turbulent diffusion jet. However the assessment of accuracy of the model should be carried out by experimental data and by results of available multidirectional codes. The present paper shows the comparison of velocity profiles given by the integral model and the CFD FLUENT 6.0 Code. The difference in results given by the two models is lower than 10% when Reynolds number at the exit nozzle below 5000.

Downloads

Download data is not yet available.

Downloads

Published

31-03-2005

Issue

Section

Research Article