Static and dynamic analysis of laminated composite plates with integrated piezoelectrics

Tran Ich Thinh, Le Kim Ngoc
Author affiliations

Authors

  • Tran Ich Thinh Hanoi University of Technology
  • Le Kim Ngoc Vietnam Electricity

DOI:

https://doi.org/10.15625/0866-7136/30/1/5611

Abstract

A Finite Element model based on First-order Shear Deformation Theory is developed for the static shape control and vibration control of la minated composite plates integrated with piezoelectric sensors and actuators. A nine-node isoparametric rectangular element with 45 degrees of freedom for the generalized displacements and 2 electrical degrees of freedom is implemented for the static and dynamic analyses. The model is validated by comparing with existing results documented in the literature. Some numerical results are presented. It is concluded that the shape of the piezoelectric laminated composite plates can reach the desired shape through passive control or active control. The influence of stacking sequence of composite plates and position of piezoelectric layers and sensors/actuators patches on the response of the piezoelectric composite plates is evaluated.

Downloads

Download data is not yet available.

Downloads

Published

31-03-2008

Issue

Section

Research Article

Most read articles by the same author(s)

1 2 3 > >>