Damage detection of beam by natural frequencies: General theory and procedure

Nguyen Tien Khiem
Author affiliations

Authors

  • Nguyen Tien Khiem Institute of Mechanics, VAST

DOI:

https://doi.org/10.15625/0866-7136/28/2/5572

Abstract

The frequency equation of single damaged beam has been established for arbitrary boundary conditions that is the main tool for analysis as well as identification of damaged beam by using measured natural frequencies. A procedure for damage detection problem presented in this paper consists of three steps. First, the modelling error is reduced by a model updating procedure, in which the material, geometrical parameters and boundary conditions are updated. Then, measurement data are corrected based on the updated model. Finally, the damage parameters are identified using updated model and corrected measurement data. Theoretical investigation is illustrated by an example.

Downloads

Downloads

Published

01-08-2006

How to Cite

Khiem, N. T. (2006). Damage detection of beam by natural frequencies: General theory and procedure. Vietnam Journal of Mechanics, 28(2), 120–132. https://doi.org/10.15625/0866-7136/28/2/5572

Issue

Section

Research Article

Most read articles by the same author(s)

<< < 1 2 3 4 > >>