Stress analysis of ceramic coatings under spherical indentation: Influence of a metallic interlayer

Le Minh Quy, Tran Ich Thinh
Author affiliations

Authors

  • Le Minh Quy Department of Mechanics of Materials and Structures, Faculty of Mechanical Engineering, Hanoi University of Technology
  • Tran Ich Thinh Department of Mechanics of Materials and Structures, Faculty of Mechanical Engineering, Hanoi University of Technology

DOI:

https://doi.org/10.15625/0866-7136/28/1/5475

Keywords:

finite element, ceramic coatings, indentation, interlayer

Abstract

Spherical indentation problems of ceramic coatings/metallic interlayer/ductile substrate were investigated numerically by axisymmetric FEA for two typical ceramic coatings with relatively high and low elastic modulus deposited on aluminum alloy and carbon steel. Various indenter radius-coating thickness ratios and interlayer thickness-coating thickness ratios were used in the modeling. Radial stress distributions were discussed in connection with model parameters. The results showed that the suitable metallic interlayer could improve resistance of ceramic coating systems through reducing the peak tensile radial stress on the surface and interface of ceramic coatings.

Downloads

Download data is not yet available.

Downloads

Published

17-04-2006

Issue

Section

Research Article

Most read articles by the same author(s)

1 2 3 > >>