Một số bài toán xác định dạng vỏ tròn xoay không chịu uốn

Ngo Huong Nhu

Author affiliations

Authors

Ngo Huong Nhu

DOI:

https://doi.org/10.15625/0866-7136/10280

Abstract

None

Downloads

Download data is not yet available.

Downloads

PDF

Published

30-06-1990

Issue

Vol. 12 No. 2 (1990)

Section

Research Article

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Crossref

Scopus

Google Scholar

Europe PMC

Most read articles by the same author(s)

Nguyen Truong Giang, Ngo Huong Nhu, Cast3M implementation of the extended finite element method for cohesive crack , Vietnam Journal of Mechanics: Vol. 33 No. 1 (2011)
Ngo Huong Nhu, Stability analysis of cylindrical shells subjected to complex loads , Vietnam Journal of Mechanics: Vol. 23 No. 4 (2001)
Ngo Huong Nhu, Nguyen Truong Giang, Calculation of fracture mechanic parameters via FEM for some cracked plates under different loads , Vietnam Journal of Mechanics: Vol. 28 No. 2 (2006)
Ngo Huong Nhu, A numerical analysis for some non-linear constitutive problems in solid mechanics , Vietnam Journal of Mechanics: Vol. 26 No. 2 (2004)
Ngo Huong Nhu, Sensitivity analysis for a problem of optimal structure design , Vietnam Journal of Mechanics: Vol. 16 No. 1 (1994)
Ngo Huong Nhu, The forms of the shell with zero bending stresses subjected to hydrostatic pressure and other loads , Vietnam Journal of Mechanics: Vol. 19 No. 2 (1997)
Ngo Huong Nhu, Crack analysis for some structures subjected to thermal and dynamic loads , Vietnam Journal of Mechanics: Vol. 30 No. 3 (2008)
Ngo Huong Nhu, Nguyen Dang Hung, Some remarks on the computation via SAMCEF and the semi-moment theory for cylindrical shells , Vietnam Journal of Mechanics: Vol. 20 No. 4 (1998)
Ngo Huong Nhu, Xác định độ dày của vỏ tròn xoay không chịu uốn làm từ vật liệu phi đàn hồi dưới tác dụng của tải trọng cho trước , Vietnam Journal of Mechanics: Vol. 13 No. 3 (1991)
Ngo Huong Nhu, Pham Hong Nga, The thickness functions of the shells of revolution subjected to axisymmetrical loads , Vietnam Journal of Mechanics: Vol. 27 No. 2 (2005)