HYBRID COMPOSITE BASED ON MAGNETITE/ CHITOSAN FOR 2,4-D AND CHRYSOIDINE REMOVAL
Keywords:magnetite, chitosan, hybrid composite, Chrysoidine, 2, 4-D
In this study, magnetite nanoparticles, chitosan, a hybrid composite of magnetite/chitosan were prepared through a simple method. The prepared materials were characterized via Fourier transform infrared spectroscopy, X-ray diffraction, vibrating sample magnetometer, Laser diffraction particle size analyzer, and Zeta Potential. Then, the adsorption capacity of these materials for chrysoidine, 2,4-dichlorophenoxyacetic acid (2,4-D) removal were also determined in the same condition. Prepared materials have the ability to adsorb selectivity with Chrysoidine and 2,4-D. There results show the potential application of hybrid composite magnetite/chitosan in the field of environmental treatment.
Nalwa H. S. - Magnetic nanostructures. American Scientific Publishers: Los Angeles, CA, 2009.
Le Q. L., Tran T. B. H, Nguyen X. H., Le. V. C, Pham D. T., Thai H., Trinh A. T. - Growth mechanism and stability of magnetite nanoparticles synthesized by the hydrothermal method. J. Nanosci. Nanotechnology 16 (7) (2016) 7373-7379.
Balaita L., Chailan J. F., Nguyen X. H., Bacaita S., Popa M. - Hybrid chitosan-gelatin magnetic polymer particles for drug release, J. Optoelectron. Adv. Mater. 16 (11-12) (2014) 1463-1471.
Hasany S. F., Rehman A., Jose R., Ahmed I. - Iron oxide magnetic nanoparticles: A short review, AIP Conf. Proc. 1502 (1) (2012) 298-321.
Bishnoi S., Kumar A., Selvaraj R. - Facile synthesis of magnetic iron oxide nanoparticles using inedible Cynometra ramiflora fruit extract waste and their photocatalytic degradation of methylene blue dye, Mater. Res. Bull. 97 (2018) 121-127.
Morillo D., Pérez G., Valiente M. - Efficient arsenic(V) and arsenic(III) removal from acidic solutions with Novel Forager Sponge-loaded superparamagnetic iron oxide nanoparticles, J. Colloid Interface Sci. 453 (2015) 132-141.
Liu W., Yang Q., Yang Z., Wang W. - Adsorption of 2,4-D on magnetic graphene and mechanism study. Colloids Surfaces A Physicochem, Eng. Asp. 509 (2016) 367-375.
Dai R., Zhang Y., Shi Z.Q., Yang F., Zhao C.S. - A facile approach towards amino-coated ferroferric oxide nanoparticles for environmental pollutant removal, J. Colloid Interface Sci. 513 (2018) 647-657.
Trinh D. A., Cao V. T., Truong T. N., Le B. T., Dao P. H., Duong V. P., Pham T. T. T., Nguyen T. H. - Influence of several factors on the adsorption ability of Cu2+ on coated chitosan materials, Vietnam Journal of Chemistry 53 (3) (2015) 352-356 (in Vietnamese).
Zhai L., Bai Z., Zhu Y., Wang B., Luo W. - Fabrication of chitosan microspheres for efficient adsorption of methyl orange, Chinese J. Chem. Eng. 26 (3) (2018) 657-666.
El Harmoudi H., El Gaini L., Daoudi E., Rhazi M., Boughaleb Y., El Mhammedi M. A., Migalska-Zalas A., Bakasse M. - Removal of 2,4-D from aqueous solutions by adsorption processes using two biopolymers: Chitin and chitosan and their optical properties, Opt. Mater. 36 (9) (2014) 1471-1477.
Shankar A., Kongot M., Saini V.K., Kumar A. - Removal of pentachlorophenol pesticide from aqueous solutions using modified chitosan. Arab. J. Chem. (2018), in press (https://doi.org/10.1016/j.arabjc.2018.01.016).
Hosseini F., Sadighian S., Hosseini-Monfared H., Mahmoodi N. M. - Dye removal and kinetics of adsorption by magnetic chitosan nanoparticles, Desalination and Water Treatment 57 (51) (2016) 24378-24386.
Tran V. H., Bui T. L, Dinh T. T., Le D. H, Huynh D. C., Trinh X. A. - Graphene oxide/Fe3O4/chitosan nanocomposite: a recoverable and recyclable adsorbent for organic dyes removal, Application to methylene blue, Materials Research Express 4 (3) (2017) 035701.
Le D. T., Tran V. H., Le D. T., Tran N. Q., Nguyen T. M. H., Nguyen D. K., Trinh X. A., Tran L. A. - Synthesis and application of chitosan/graphene oxide/magnetite nanostructure composite for Fe(III) removal from aqueous solution, Vietnam Journal of Science and Technology 56 (2) (2018) 158-164.
Nguyen X. H., Le T. S., Le Q. L., Do Q. T. - Property of the nano-Fe3O4/activated carbon composite material prepared using hydrothermal method, Vietnam Journal of Science and Technology 50 (3B) (2012) 311-317 (in Vietnamese).
Authors who publish with Vietnam Journal of Science and Technology agree with the following terms:
- The manuscript is not under consideration for publication elsewhere. When a manuscript is accepted for publication, the author agrees to automatic transfer of the copyright to the editorial office.
- The manuscript should not be published elsewhere in any language without the consent of the copyright holders. Authors have the right to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal’s published version of their work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are encouraged to post their work online (e.g., in institutional repositories or on their websites) prior to or during the submission process, as it can lead to productive exchanges or/and greater number of citation to the to-be-published work (See The Effect of Open Access).