Fabrication and Characterization of Single-segmented  CoNiP and Multi-segment CoNiP/Au Nanowires

Le Tuan Tu; Luu Van Thiem

doi:10.15625/0868-3166/24/3/4247

Fabrication and Characterization of Single-segmented CoNiP and Multi-segment CoNiP/Au Nanowires

Le Tuan Tu, Luu Van Thiem

Author affiliations

Authors

Le Tuan Tu Faculty of physics, VNU University of Science, Vietnam National University, Hanoi, Vietnam
Luu Van Thiem Faculty of Engineering Physics and Nanotechnology, VNU University of Engineering Technology, Vietnam National University, Hanoi, Vietnam and Faculty of basic science, Hanoi industrial College for Textile, Garment and Fashion, Ha noi, Vietnam

DOI:

https://doi.org/10.15625/0868-3166/24/3/4247

Abstract

This paper represents the fabrication of CoNiP single segment and CoNiP/Au multisegment nanowires. We have fabricated these nanowires by electrodeposition method into polycarbonate templates with a nominal pore diameter about 100 nm. The hystersis loops were measured with the applied magnetic field parallel and perpendicular to the wire axis using a vibrating sample magnetometry (VSM). The structure morphology was observed by Scanning Electron Miroscopy (SEM) and the element composition of CoNiP/Au multisegment nanowires were analyzed by EDS. The results show that these nanowires are very uniform with the diameter of 100 nm. The observed coercivity (H_C) and squareness (Mr/Ms) of CoNiP single nanowires are larger than the CoNiP/Au multisegment nanowires.

Downloads

Download data is not yet available.

Metrics

Metrics Loading ...

Downloads

Published

29-09-2014

How to Cite

[1]

L. T. Tu and L. V. Thiem, “Fabrication and Characterization of Single-segmented CoNiP and Multi-segment CoNiP/Au Nanowires”, Comm. Phys., vol. 24, no. 3, p. 283, Sep. 2014.

IEEE

Download Citation

Issue

Vol. 24 No. 3 (2014)

Section

Papers

License

Authors who publish with CIP agree with the following terms:

The manuscript is not under consideration for publication elsewhere. When a manuscript is accepted for publication, the author agrees to automatic transfer of the copyright to the editorial office.
The manuscript should not be published elsewhere in any language without the consent of the copyright holders. Authors have the right to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal’s published version of their work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
Authors are encouraged to post their work online (e.g., in institutional repositories or on their websites) prior to or during the submission process, as it can lead to productive exchanges or/and greater number of citation to the to-be-published work (See The Effect of Open Access).