On the design of an optimum active mass-spring-inverted pendulum dynamic vibration absorber for the inverted pendulum type structure

Nguyen Chi Sang, Nguyen Cao Thang
Author affiliations

Authors

  • Nguyen Chi Sang National Research Institute of Mechanical Engineering, Hanoi, Vietnam
  • Nguyen Cao Thang National Research Institute of Mechanical Engineering, Hanoi, Vietnam

DOI:

https://doi.org/10.15625/0866-7136/30/4/5638

Abstract

A Dynamic Vibration Absorber (DVA) is appropriate equipment for vibration control in many kinds of engineering. In general, there are two main types of DVAs: the passive DVAs and the active DVAs. The paper presents a design of an active mass-spring-inverted pendulum DVA for the inverted pendulum type structure in case the external force is white noise process. The design is based on the optimum passive DVA as carried out in [4] and apply the optimum control force by minimizing the performance index. Numerical simulation which is done for an inverted pendulum structure in the ocean in three cases without DVA, with passive DVA, with active DVA shows that the active DVA is better than the passive one.

Downloads

Download data is not yet available.

Metrics

Metrics Loading ...

Downloads

Published

31-12-2008

How to Cite

[1]
N. C. Sang and N. C. Thang, On the design of an optimum active mass-spring-inverted pendulum dynamic vibration absorber for the inverted pendulum type structure, Vietnam J. Mech. 30 (2008) 329 –. DOI: https://doi.org/10.15625/0866-7136/30/4/5638.

Issue

Section

Research Article