Some remarks on the computation via SAMCEF and the semi-moment theory for cylindrical shells

Ngo Huong Nhu; Nguyen Dang Hung

doi:10.15625/0866-7136/10040

Some remarks on the computation via SAMCEF and the semi-moment theory for cylindrical shells

Ngo Huong Nhu, Nguyen Dang Hung

Author affiliations

Authors

Ngo Huong Nhu
Nguyen Dang Hung

DOI:

https://doi.org/10.15625/0866-7136/10040

Abstract

None

Downloads

Download data is not yet available.

Metrics

Metrics Loading ...

Downloads

PDF

Published

30-12-1998

How to Cite

[1]

N. H. Nhu and N. D. Hung, Some remarks on the computation via SAMCEF and the semi-moment theory for cylindrical shells, Vietnam J. Mech. 20 (1998) 41–51. DOI: https://doi.org/10.15625/0866-7136/10040.

Download Citation

Issue

Vol. 20 No. 4 (1998)

Section

Research Article

License

This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Most read articles by the same author(s)

Nguyen Truong Giang, Ngo Huong Nhu, Cast3M implementation of the extended finite element method for cohesive crack , Vietnam Journal of Mechanics: Vol. 33 No. 1 (2011)
Ngo Huong Nhu, Stability analysis of cylindrical shells subjected to complex loads , Vietnam Journal of Mechanics: Vol. 23 No. 4 (2001)
Ngo Huong Nhu, Nguyen Truong Giang, Calculation of fracture mechanic parameters via FEM for some cracked plates under different loads , Vietnam Journal of Mechanics: Vol. 28 No. 2 (2006)
Nguyen Dang Hung, Hoang Van Long, Automatic limit and shakedown analysis of 3-D steel frames , Vietnam Journal of Mechanics: Vol. 29 No. 3 (2007)
Ngo Huong Nhu, A numerical analysis for some non-linear constitutive problems in solid mechanics , Vietnam Journal of Mechanics: Vol. 26 No. 2 (2004)
Nguyen Dang Hung, Tran Thanh Ngoc, Analysis of cracked plate membrane problem using Metis finite element model , Vietnam Journal of Mechanics: Vol. 24 No. 4 (2002)
Ngo Huong Nhu, Sensitivity analysis for a problem of optimal structure design , Vietnam Journal of Mechanics: Vol. 16 No. 1 (1994)
Ngo Huong Nhu, The forms of the shell with zero bending stresses subjected to hydrostatic pressure and other loads , Vietnam Journal of Mechanics: Vol. 19 No. 2 (1997)
Nguyen Tien Duong, Nguyen Dang Hung, Using metis model to solve the torsion problem of a prismatic bar , Vietnam Journal of Mechanics: Vol. 27 No. 3 (2005)
Ngo Huong Nhu, Crack analysis for some structures subjected to thermal and dynamic loads , Vietnam Journal of Mechanics: Vol. 30 No. 3 (2008)

1 2 > >>

Some remarks on the computation via SAMCEF and the semi-moment theory for cylindrical shells

Authors

DOI: