Mechanical, thermal properties and morphology of composite coating based on acrylic emulsion polymer and graphene oxide

Dao Phi Hung, Vo An Quan, Trinh Van Thanh, Nguyen Anh Hiep, Nguyen Thien Vuong, Mac Van Phuc
Author affiliations

Authors

  • Dao Phi Hung Institute for Tropical Technology, VAST, 18 Hoang Quoc Viet, Cau Giay, Ha Noi, Viet Nam
  • Vo An Quan Institute for Tropical Technology, VAST, 18 Hoang Quoc Viet, Cau Giay, Ha Noi, Viet Nam
  • Trinh Van Thanh Institute for Tropical Technology, VAST, 18 Hoang Quoc Viet, Cau Giay, Ha Noi, Viet Nam
  • Nguyen Anh Hiep Institute for Tropical Technology, VAST, 18 Hoang Quoc Viet, Cau Giay, Ha Noi, Viet Nam
  • Nguyen Thien Vuong Institute for Tropical Technology, VAST, 18 Hoang Quoc Viet, Cau Giay, Ha Noi, Viet Nam
  • Mac Van Phuc Institute for Tropical Technology, VAST, 18 Hoang Quoc Viet, Cau Giay, Ha Noi, Viet Nam

DOI:

https://doi.org/10.15625/2525-2518/58/2/13932

Abstract

Studied results showed that graphene oxide (GO) had insignificant effect on adhesion of composite coating while graphene oxide improved abrasion resistance of composite coatings. The abrasion durability of studied coatings increased with GO ratio rising to 0.5% and then abrasion resistance of coatings decreased with GO ratio continuous growing up. SEM images witnessed that GO dispersed well into polymer matrix if GO weight ratio was 0.5%. TGA results also illustrated that thermal property of GO composite was better than that of neat coating.

Downloads

Download data is not yet available.

Downloads

Published

20-03-2020

How to Cite

[1]
D. P. Hung, V. A. . Quan, T. V. Thanh, N. A. Hiep, N. T. Vuong, and M. V. Phuc, “Mechanical, thermal properties and morphology of composite coating based on acrylic emulsion polymer and graphene oxide”, Vietnam J. Sci. Technol., vol. 58, no. 2, pp. 228–236, Mar. 2020.

Issue

Section

Materials

Most read articles by the same author(s)