Influence of a polyurethane diacrylate and hexanediol diacrylate ratio on the photocrosslinking and properties of UV-cured coatings
Author affiliations
DOI:
https://doi.org/10.15625/2525-2518/57/3/13357Keywords:
photocrosslinking, polyurethane diacrylate, hexanediol diacrylate, photoinitiator I.184Abstract
Influence of a polyurethane dicarylate (UDA) and hexanediol diacrylate (HDDA) ratio on the photocrosslinking and properties of the systems based on UDA, HDDA and photoinitiator I.184 has been investigated. It was demonstrated that in the range of the UDA/HDDA ratio from 80/20 to 20/80, the fine, smooth films were obtained when the ratios were from 60/40 to 40/60 and the lower UDA/HDDA ratio, the faster conversion of acrylate groups. The acrylate groups in the investigated coatings were converted rapidly, leading to formation of tridimensional polymer networks and change of physico-mechanical properties of the coatings.
Downloads
References
Decker C. - Effect of UV radiation on polymers, in N.P.Cheremisinoff(ed), M. Dekker. Handbook of Polymer science and Technology, 1989, pp. 579-604.
Le Xuan Hien - Chemical modification of vegetable oils and application. Natural Science and Technology Publisher, Vietnam Academy of Science and Technology, Hanoi, 2013 (In Vietnamese).
C. Decker, K. Zahouily, L. Keller, S. Benfarhi, T. Bendaikha, J. Baron- Ultrafast synthesis of bentomite acrylate nanocomposite materials by UV radiation curing. Journal of Materials Science, 37 (2002), pp. 4831-4838.
Dapawan Kunwong, Natthawadee Sumanochitraporn, and Supranee Kaewpirom- Curing behavior of a UV-curable coating based on urethane acrylate oligomer: the influence of reactive monomers. Songklanakarin Journal of Science and Technology, 33 (2) (2011), pp. 201-207.
Viera Jancovicova, Milan Mikula, Bohuslava Havlinova, Zuzana Jakubikova - Influence of UV-curing conditions on polymerization kinetics and gloss of urethane acrylate coatings. Progress in Organic Coatings, 76 (2013), pp. 432-438.
Ghodsieh Mashouf, Morteza Ebrahimi and Saeed Bastani - UV curable urethane acrylate coatings formulation: Experimental design approach. Pigment & Resin Technology, 43(2) (2014) pp. 61-68.
Tuba Çakır Çanak, Esra Kıraylar, İ. Ersin Serhatli - Preparation and Application of Urethane Acrylate Coatings for Enhanching Mechanical Properties of Coagulated Surfaces. Karaelmas Fen ve Müh. Derg. 6 (2) (2016), pp. 359-368.
Le Xuan Hien, Do Thi Ngoc Minh, Nguyen Thi Viet Trieu, Christian Decker - Influence of some vegetable oils on the photocrosslinking of coatings based on an o-crezol novolac epoxy resin and bis-cycloaliphatic diepoxide. Journal of Coatings Technology and Research, 8 (3) (2011), pp. 343 – 353.
Downloads
Published
How to Cite
Issue
Section
License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Vietnam Journal of Sciences and Technology (VJST) is an open access and peer-reviewed journal. All academic publications could be made free to read and downloaded for everyone. In addition, articles are published under term of the Creative Commons Attribution-ShareAlike 4.0 International (CC BY-SA) Licence which permits use, distribution and reproduction in any medium, provided the original work is properly cited & ShareAlike terms followed.
Copyright on any research article published in VJST is retained by the respective author(s), without restrictions. Authors grant VAST Journals System a license to publish the article and identify itself as the original publisher. Upon author(s) by giving permission to VJST either via VJST journal portal or other channel to publish their research work in VJST agrees to all the terms and conditions of https://creativecommons.org/licenses/by-sa/4.0/ License and terms & condition set by VJST.
Authors have the responsibility of to secure all necessary copyright permissions for the use of 3rd-party materials in their manuscript.
Vietnam Journal of Science and Technology (VJST) is pleased to notice: